Q C M CO -- A-1104 PRIMER FOR PLASTISOL COATINGS  -- 8030-01-331-8446
<pre>=====================  Product Identification  =====================

Product ID:A-1104 PRIMER FOR PLASTISOL COATINGS
MSDS Date:05/05/2000
FSC:8030
NIIN:01-331-8446
Status Code:A
=== Responsible Party ===
Company Name:Q C M CO
Address:930 CENTRAL AVE S
City:KENT
State:WA
ZIP:98032-6105
Country:US
Info Phone Num:253-859-0933, FAX 253-859-0935
Emergency Phone Num:1-800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:8L872
=== Contractor Identification ===
Company Name:Q C M CO
Address:930 CENTRAL AVE S
Box:City:KENT
State:WA
ZIP:98032-6105
Country:US
Phone:253-859-0933, FAX 253-859-0935
CAGE:8L872

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL ETHYL KETONE
CAS:78-93-3
RTECS #:EL6475000
= Wt:62.
OSHA PEL:590 MG/M3;200 PPM
ACGIH TLV:590 MG/M3;200 PPM
ACGIH STEL:885 MG/M3;300 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ETHANOL
CAS:64-17-5
RTECS #:KQ6300000
= Wt:20.
OSHA PEL:1900 MG/M3;1000 PPM
ACGIH TLV:1880 MG/M3;1000 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:INHALATION MAY PRODUCE CENTRAL NERVOUS
    SYSTEM DEPRESSION.
Effects of Overexposure:EFFECTS OF OVEREXPOSURE; SKIN, EYE, RESPIRATORY
    AND GASTROINTESTINAL IRRITATION, POSSIBLY SEVERE, EXCESSIVE
    INHALATION MAY PRODUCE CENTRAL NERVOUS SYSTEM DEPRESSION.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT:IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR
    AT	LEAST 15 MINUTES. SEEK MEDICAL ATTENTION. SKIN CONTACT: REMOVE
    CONTAMINATED CLOTHING. WASH THOROUGHLY WITH SOAP AND WATER.
    INHALATION:  REMOVE TO FRESH AIR. GIVE OXYGEN IF NECESSARY.
    INGESTION: SEEK IMMEDIATE MEDICAL ATTENTION. DO NOT INDUCE
    VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=-8.7C, 16.F
Lower Limits:1.8%
Upper Limits:19.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS WITH
    FULL FACEPIECE. COOL CONTAINERS IN VICINITY WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:KEEP ALL IGNITION SOURCES AWAY. GROUND
    ALL CONTAINERS. VAPORS MAY TRAVEL TO SOURCE OF IGNITION AND CAUSE
    FLASHBACK. FIRE CAUSES ACID SMOKE AND/OR FUMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. SMALL SPILLS:
    TAKE UP WITH ABSORBENT MATERIAL. LARGE SPILLS: DAM AND RECOVER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID HIGH TEMPERATURE AREA AND
    IGNITION SOURCES. ALL HANDLING EQUIPMENT SHOULD BE GROUNDED AND
    EXPLOSION PROOF. AVOID ALL PERSONAL CONTACT. WASH THOROUGHLY AFTER
    HANDLING.
Other Precautions:DOT CLASS: FLAMMABLE LIQUID (METHYL ETHYL KETONE).
    HAZARD IDENTITY: HEALTH 12: FLAMMABILITY13: REACTIVITY10:
    CONTACT:H:

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE APPROVED SELF CONTAINED BREATHING APPARATUS
    IF NECESSARY.
Ventilation:LOCAL EXHAUST: NECESSARY MECHANICAL (GENERAL) NECESSARY.
Protective Gloves:RUBBER OR NEOPRENE.
Eye Protection:CHEMICAL SPLASH GOGGLE.
Other Protective Equipment:SAFETY SHOWER. EYE WASH STATION.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:=73.9C, 165.F
Vapor Pres:4.6
Vapor Density:2.4
Spec Gravity:0.86
VOC Pounds/Gallon:692
VOC Grams/Liter:5.78
Solubility in Water:APPRECIABLE
Appearance and Odor:CLEAR TO AMBER LIQUID, KETONE ODOR.
Percent Volatiles by Volume:86%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STRONG ACIDS OR OXIDIZERS, HIGH
    TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    MISCELLANEOUS HYDROCARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ACCORDING TO STATE, FEDERAL, AND LOCAL
    REGULATIONS. HAZARDOUS WASTE CODE: F005,D001.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.