G E SILICONE CO -- SCS1009 SILICONE SEALANT  -- 8030-00F039877
<pre>=====================  Product Identification  =====================

Product ID:SCS1009 SILICONE SEALANT
MSDS Date:02/12/1993
FSC:8030
NIIN:00F039877
=== Responsible Party ===
Company Name:G E SILICONE CO
Address:260 HUDSON RIVER RD
City:WATERFORD
State:NY
ZIP:12188-5000
Country:US
Info Phone Num:518-237-3330/518-266-2641
Emergency Phone Num:518-237-3330/800-332-3390
Preparer's Name:DA POLSINELLI
CAGE:GO375
=== Contractor Identification ===
Company Name:G E SILICONE CO
Address:260 HUDSON RIVER RD
City:WATERFORD
State:NY
ZIP:12188-5000
Country:US
Phone:518-237-3330/518-266-2641
CAGE:GO375
Company Name:GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
Address:260 HUDSON RIVER RD
Box:City:WATERFORD
State:NY
ZIP:12188
Country:US
Phone:518-237-3330/800-332-3390
CAGE:01139

=============  Composition/Information on Ingredients  =============

Ingred Name:AMORPHOUS FUSED SILICA, SILICON DIOXIDE, QUARTZ, SILICON   
    (SUSPECTED HUMAN CARCINOGEN BY IARC - GROUP 2A)  *95-1*
CAS:60676-86-0
RTECS #:VV7328000
Fraction by Wt: 5-10%
Other REC Limits:30 MG/CUM TOTAL DUST
ACGIH TLV:0.1 MG/CUM (RESP) IC

Ingred Name:METHYLTRIACETOXYSILANE, ALKYL TRIACETOXY SILANE
CAS:4253-34-3
RTECS #:VV4500000
Fraction by Wt: 1-5%

Ingred Name:SILOXANES & SILICONES DI-ME HYDROY-TERMINATED     *95-1*
CAS:70131-67-8
Fraction by Wt: 60-80%

Ingred Name:TRADE SECRET COMPONENT
Fraction by Wt: 10-30%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50(RAT): >40,000 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:INGESTION: MAY BE HARMFUL. SKIN:
    UNCURED PRODUCT CONTACT WILL IRRITATE LIPS, GUMS & TONGUE.
    INHALATION: CAUSES IRRITATION OF THE MOUTH, NOSE & THROAT. APPLIES
    ONLY IN UNCURED STATE. EYES: UNCURED CONT ACT IRRITATES.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION

=======================  First Aid Measures  =======================

First Aid:INGESTION: RINSE MOUTH W/WATER SEVERAL TIMES. SKIN: REMOVE
    COMPLETELY W/A DRY CLOTH/PAPER TOWEL, BEFORE WASHING W/DETERGENT &
    WATER. INHALATION: MOVE TO FRESH AIR. EYES: IMMEDIATELY FLUSH
    W/PLENTY OF  WATER FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE, SCRAPE/SOAK UP IN AN INERT MATERIAL &
    PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES W/DETERGENT
    & WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER PROTECTIVE
    EQUIPMENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE IN A WELL VENTILATED AREA. DON'T
    HANDLE LENSES UNTIL ALL SEALANT HAS BEEN CLEANED FROM THE
    FINGERTIPS, NAILS & CUTICLES.
Other Precautions:RESIDUAL SEALANT MAY REMAIN ON FINGERS FOR SEVERAL
    DAYS & TRANSFER TO LENSES. AVOID CONTACT W/SKIN & EYES. DON'T WEAR
    CONTACT LENSES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE APPROVED NIOSH RESPIRATORY PROTECTION IF TLV
    EXCEEDED/OVER EXPOSURE IS LIKELY.
Ventilation:MECHANICAL: TO STAY <TLV OF 10 PPM ACETIC ACID.
Protective Gloves:CLOTH
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH STATIONS
Supplemental Safety and Health
ORAL LD50 INFORMATION IS FOR DIMETHYL POLYSILOXANE SILANOL/ST.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.04
Evaporation Rate &amp; Reference:(BU AC=1): <1
Solubility in Water:INSOLUBLE
Appearance and Odor:ALUMINUM SOLID W/ACETIC ACID ODOR
Percent Volatiles by Volume:<8

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:METHYL POLYSILOXANES-TEMP AT />300F.
Hazardous Decomposition Products:CO, CO2, SILICON DIOXIDE, ACETIC ACID,
    FORMALDEHYDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.