GE SILICONES -- SILICONE RUBBER SEALANT, GE5000  -- 8030-00N010180
<pre>=====================  Product Identification  =====================

Product ID:SILICONE RUBBER SEALANT, GE5000
MSDS Date:03/05/1990
FSC:8030
NIIN:00N010180
=== Responsible Party ===
Company Name:GE SILICONES
Address:260 HUDSON RIVER ROAD
City:WATERFORD
State:NY
ZIP:12188
Country:US
Info Phone Num:518-237-3330
Emergency Phone Num:518-237-3330
Preparer's Name:DA POLSINELLI
CAGE:GESIL
=== Contractor Identification ===
Company Name:GE SILICONES
Address:260 HUDSON RIVER ROAD
City:WATERFORD
State:NY
ZIP:12188
Country:US
Phone:518-237-3330
CAGE:GESIL
Company Name:GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
Address:260 HUDSON RIVER RD
Box:City:WATERFORD
State:NY
ZIP:12188
Country:US
Phone:518-237-3330/800-332-3390
CAGE:01139

=============  Composition/Information on Ingredients  =============

Ingred Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION:MAY BE HARMFUL IF SWALLOWED.
    SKIN:UNCURED PRODUCT CONTACT MAY IRRITATE THE SKIN.
    INHALATION:CAUSES MODERATE RESPIRATORY IRRITATION. APPLIES ONLY IN
    UNCURED STATE. EYE:UNCURED PRODUCT CONTACT	IRRITATES EYES.
    SUBCHRONIC (TARGET ORGAN) EFFECTS:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INGESTION:RINSE MOUTH WITH WATER SEVERAL TIMES. SKIN:REMOVE
    COMPLETELY WITH A DRY CLOTH OR PAPER TOWEL, BEFORE WASHING WITH
    DETERGENT AND WATER. INHALATION:MOVE PERSON TO FRESH AIR.
    EYES:IMMEDIATELY F LUSH WITH PLENTY OF WATER FOR AT LEAST 15
    MINUTES AND GET MEDICAL ATTENTION IF IRRITATION PERSISTS.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
    AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
    DETERGENT AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER
    PROTECTIVE EQUIPMENT AS SPECIFIE D IN THE PROTECTIVE EQUIPMENT
    SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CNTNR CLSD WHEN NOT IN USE. AVOID
    CONT W/SKIN & EYES. REMOVE CONT LENSES BEFORE USING SEALANT.
Other Precautions:DO NOT HNDL LENSES UNTIL ALL SEALANT HAS BEEN CLEANED
    FROM FINGER-TIPS, NAILS & CUTICLES. RESIDUAL SEALANT MAY REMAIN ON
    FINGERS FOR SEVERAL DAYS & TRANSFER TO LENSES & CAUSE SEV EYE
    IRRIT. USE MECH V ENT TO STAY BELOW TLV OF 25 PPM (SUPDAT)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE IN A WELL VENTILATED AREA. USE APPROVED
    NIOSH/MSHA RESPIRATORY PROTECTION IF TLV EXCEEDED......OR OVER
    EXPOSURE IS LIKELY.
Ventilation:EXHAUST VENTILATION. USE IN A WELL VENTILATED AREA. USE
    ONLY IN WELL VENTILATED AREA.
Protective Gloves:CLOTH GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
    SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
USERS OF "L" VERSION CONSULT "LR" VERSION FOR ADDNL INFO . OTHER
    PRECS:AMMONIA. PROD RELEASES METHANOL DURING APPLICATION AND
    CURING. (METHANOL TLV=200 PPM). PRODUCT RELEASES AMMONIA DURING
    APPL ICATION AND CURING. UNCURED PRODUCT CONTACT MAY IRRITATE EYES
    AND SKIN.

==================  Physical/Chemical Properties  ==================

Evaporation Rate &amp; Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSLUCENT SOLID WITH AN AMMONIA ODOR.
Percent Volatiles by Volume:<4

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:VAPOR AND/OR LIQUID REACT WITH WATER TO
    FORM AMMONIA.
Hazardous Decomposition Products:CARBON DIOXIDE, SILICON DIOXIDE,
    METHANOL, AMMONIA.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
    FEDERAL, STATE AND LOCAL REGULATIONS. BURY IN A LICENSED LANDFILL
    OR BURN IN AN APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE AND
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.