OATEY COMPANY -- PVC CEMENT-HEAVY DUTY-CLEAR  -- 8040-00N003299
<pre>=====================  Product Identification  =====================

Product ID:PVC CEMENT-HEAVY DUTY-CLEAR
MSDS Date:01/01/1985
FSC:8040
NIIN:00N003299
=== Responsible Party ===
Company Name:OATEY COMPANY
Address:4700 W. 160TH STREET
Box:35906
City:CLEVELAND
State:OH
ZIP:44135-2632
Country:US
Info Phone Num:216-267-7100
Emergency Phone Num:216-267-7100 OR 303-623-5716 COLLEC
CAGE:EO573
=== Contractor Identification ===
Company Name:OATEY CO
Address:4700 WEST 160TH STREET
Box:35906
City:CLEVELAND
State:OH
ZIP:44135
Country:US
Phone:216-267-7100/303-623-5716
CAGE:53472
Company Name:OATEY COMPANY
Address:4700 W 160TH STREET
Box:35906
City:CLEVELAND
State:OH
ZIP:44135-2632
Country:US
Phone:216-267-7100
CAGE:EO573

=============  Composition/Information on Ingredients  =============

Ingred Name:TETRAHYDROFURAN  (SARA III)
CAS:109-99-9
RTECS #:LU5950000
OSHA PEL:200 PPM/250 STEL
ACGIH TLV:200 PPM/250STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:CYCLOHEXANONE  (SARA III)
CAS:108-94-1
RTECS #:GW1050000
Fraction by Wt: 9-13%
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:DIZZINESS, HEADACHE, NAUSEA.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH W/ WATER FOR 15 MINUTES. INHAL:
    REMOVE TO FRESH AIR. SKIN: FLUSH W/ WATER. REMOVE CEMENT AND
    CONTAMINATED CLOTHING.

=====================  Fire Fighting Measures  =====================

Flash Point:6F; -14C (CC)
Lower Limits:1.8
Upper Limits:11.8
Extinguishing Media:HIGH PRESSURE WATER SPRAY, DRY CHEMICAL, CARBON
    DIOXIDE FOAM
Fire Fighting Procedures:USE EXTINGUISHING MEDIA DIRECTED AT BASE OF
    FLAMES.
Unusual Fire/Explosion Hazard:VAPOR IS HEAVIER THAN AIR AND WILL SETTLE
    ON FLOOR OR LOW AREAS. KEEP FROM IGNITION SOURCES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES. FOR ENCLOSED AREA
    PROVIDE VENTILATION. MOP UP W/ RAGS AND REMOVE TO OUTDOORS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:ROTATE STOCK. STORE IN COOL AREA AND
    AWAY FROM PILOT LIGHTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:MFR STATES NOT REQUIRED
Ventilation:SUFFICIENT VENT TO KEEP BELOW TLV.
Protective Gloves:RUBBER GLOVES
Eye Protection:NOT REQUIRED.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:151F; 66C
Vapor Pres:145
Vapor Density:2.5
Spec Gravity:0.945
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LOW VISCOSITY COLORLESS LIQ,ETHER-LIKE ODOR.
Percent Volatiles by Volume:89

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:MFR RECOMMENDS TO DISPOSE OF RAGS AFTER SOLVENT
    HAS EVAPORATED. DISPOSAL METHOD MUST BE IAW FEDERAL, STATE AND
    LOCAL CODES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.