L-TEC WELDING & CUTTING SYSTEMS -- L-TEC 95  -- 3439-01-015-6834
<pre>=====================  Product Identification  =====================

Product ID:L-TEC 95
MSDS Date:07/01/1989
FSC:3439
NIIN:01-015-6834
=== Responsible Party ===
Company Name:L-TEC WELDING & CUTTING SYSTEMS
Box:710
City:ASHTABULA
State:OH
ZIP:44004
Country:US
Info Phone Num:216-992-1265
Emergency Phone Num:216-992-1265, 216-992-5186
CAGE:DO412
=== Contractor Identification ===
Company Name:L-TEC WELDING & CUTTING SYS
Box:710
City:ASHTABULA
State:OH
ZIP:44004
Phone:(216) 992-1265
CAGE:DO412
Company Name:L-TEC WELDING AND CUTTING SYSTEMS
Address:3325 MIDDLE RD
Box:710
City:ASHTABULA
State:OH
ZIP:44004
Country:US
Phone:216-992-5186
CAGE:55019

=============  Composition/Information on Ingredients  =============

Ingred Name:CARBON
CAS:1333-86-4
RTECS #:FF5000000
Fraction by Wt: 0.06%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3

Ingred Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 1.65%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293

Ingred Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 0.35%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:COPPER (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: <0.50%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 0.4%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293

Ingred Name:CHROMIUM (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 0.1%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:NICKEL (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 1.7%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192

Ingred Name:TITANIUM
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: <0.10%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:10 MG TIO2/M3
ACGIH TLV:10 MG TIO2/M3

Ingred Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: BALANCE
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:10 MG FE2O3/M3
ACGIH TLV:5 MG FE2O3/M3

Ingred Name:ZIRCONIUM
CAS:7440-67-7
RTECS #:ZH7070000
Fraction by Wt: <0.50%
OSHA PEL:5 MG/M3/10 STEL
ACGIH TLV:5 MG/M3/10 STEL;9192

Ingred Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: TO 100%
OSHA PEL:10 MG FE*2O*3/M3
ACGIH TLV:5 MG FE*2O*3/M3

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IS NOT HAZARDOUS UNTIL USED IN
    WELDING. THEN METAL FUMES,ULTRA-VIOLET RAYS,NOISE AND ELECTRIC
    SHOCK ARE HAZARDS.CHRONIC OVEREXPOSURE TO METAL FUMES,MAY AFFECT
    PULMONARY FUNCTION.
Explanation of Carcinogenicity:IARC & NTP LIST CHROME AND NICKEL AND
    SOME OF THEIR COMPOUNDS AS CARCINOGENS.
Effects of Overexposure:METAL FUME:METALLIC TASTE,NAUSEA,DIZZINESS,
    FEVER,POSSIBLE ALLERGIC REACTIONS. ULTRA-VIOLET RAYS:"SUN BURN" OF
    EYES AND EXPOSED SKIN. MAY CAUSE PERMINENT DAMAGE TO VISION.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS.

=======================  First Aid Measures  =======================

First Aid:ELECTRIC SHOCK:TURN OFF POWER. GIVE CPR OR ARTIFICIAL
    RESPIRATION.IF NEEDED. GET MEDICAL ATTENTION. FUME INHALATION:
    REMOVE FROM EXPOSURE. GET MEDICAL CARE. ARC BURN:(ESPECIALLY EYES)
    GET MEDICAL ATTE NTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:USE EXTINGUISHING AGENT APPROPRIATE FOR SURROUNDING
    FIRE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS MAY IGNITE
    COMBUSTIBLE MATERIALS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP UP RESIDUE. TAKE CARE TO CAUSE A MINIMUM
    OF DUST.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:PRODUCT IS NOT HAZARDOUS IN STORAGE.
    LIFT PROPERLY WHEN HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH APPROVED RESPIRATOR WITH METAL FUME
    CARTRIDGES WHEN WELDING IN AREA WHERE EXPOSURE EXCEEDS TLV/PEL.
Ventilation:USE VENTILATION AND LOCAL EXHAUST TO KEEP EXPOSURES BELOW
    TLV/PEL.
Protective Gloves:WELDERS GLOVES (PROTECT FROM THERM BURN)
Eye Protection:FACE SHIELD WITH ANSI Z49.1 GLASS.
Other Protective Equipment:CLOTHING TO PROTECT FROM RADIATION,SPARKS,
    ELECTRIC SHOCK,THERMAL BURNS.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Appearance and Odor:BARE OR COATED STEEL WIRE.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES OF METALS & OXIDES  OF
    METALS,CARBON AND NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.