COMPAC INDUSTRIES -- 110 FSK TAPE, ACRYLIC ADHESIVE, WITH A RELEASE LINER  -- 7510-00N091278
<pre>=====================  Product Identification  =====================

Product ID:110 FSK TAPE, ACRYLIC ADHESIVE, WITH A RELEASE LINER
MSDS Date:06/30/1997
FSC:7510
NIIN:00N091278
Status Code:A
=== Responsible Party ===
Company Name:COMPAC INDUSTRIES
Address:150 FIELDCREST AVENUE
City:EDISON
State:NJ
ZIP:08837
Country:US
Info Phone Num:732-225-2080
Emergency Phone Num:800-631-5308
Resp. Party Other MSDS Num.:110; REV. 01
CAGE:31343
=== Contractor Identification ===
Company Name:COMPAC INDUSTRIES
Address:150 FIELDCREST AVENUE
Box:City:EDISON
State:NJ
ZIP:08837
Country:US
Phone:732-225-2080
CAGE:31343

=============  Composition/Information on Ingredients  =============

Ingred Name:FIBROUS GLASS
CAS:65997-17-3
RTECS #:LK3651000
Code:F
ACGIH TLV:10 MG/M3

Ingred Name:ANTIMONY OXIDE; (ANTIMONY TRI-OXIDE)
CAS:1309-64-4
RTECS #:CC5650000
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG/M3
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:COMPAC CONSIDERS THIS PROD TO FALL
    UNDER THE CLASSIFICATION OF "ARTICLE", WHICH IS DEFINED IN CFR
    1910.1200 AS: "A MANUFACTURED ITEM WHICH IS FORMED TO A SPECIFIC
    SHAPE OR DESIGN DURING MANUFACTURE, I T'S END USE FUNCTION(S)
    DEPENDANT INWHOLE OR IN PART UPON IT'S SHAPE OR DESIGN DURING END
    USE, AND WHICH DOES NOT RELEASE OR OTHERWISE RESULT IN EXPOSURE TO,
    A HAZARDOUS CHEMICAL UNDER NORMAL CONDITIO NS OF USE." MFR BELIEVES
    THIS PRODUCT MEETS THE THREE CRITERIA CITED. THIS INTERPRETATION
    WOULD SUGGEST THAT, TECHNICALLY, THIS PRODUCT DOES NOT REQUIRE AN
    MSDS. MFR PROVIDES THIS MSDS STRICTLY FOR IN FORMATIONAL PURPOSES
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:ANTIMONY TRIOXIDE: IARC MONOGRAPHS ON
    THE EVALUATION OF CARCINOGENIC RISK OF CHEMICALS TO MAN, VOL 47, PG
    291, 1989: GROUP 2B. ANIMAL: NEOPLASTIGENIC, CVS & LUNG EFFECTS.
Effects of Overexposure:HLTH HAZ: ONLY. IF YOU SHOULD HAVE FURTHER
    QUESTIONS, PLEASE CONTACT USE AT NUMBER(S) LISTED. THE INFORMATION
    IN THIS MSDS WAS OBTAINED FROM SOURCES WHICH ARE BELIEVED RELIABLE.
    HOWEVER, THE INFORMATI ON IS PROVIDED WITHOUT ANY RESPONSIBILITY OR
    WARRANTY, EXPRESSED OR IMPLIED REGARDING THE ACCURACY OR
    CORRECTNESS.

=======================  First Aid Measures  =======================

First Aid:INGESTION: CALL MD IMMEDIATELY . SKIN: FLUSH W/COPIOUS
    AMOUNTS OF WATER. CALL MD . INHALATION: REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYE: IMMEDIATELY FLUSH W/
    POTABLE WATER FOR AT LEAST 15 MINUTES, SEEK ASSISTANCE FROM MD .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CLASS D EXTINGUISHING AGENT OR DRY SAND, DO NOT USE
    HALOGENATED EXTINGUISHING AGENT (BASED ON ALUM.)
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:HARMFUL VAPORS MAY BE RELEASED UNDER
    CERTAIN FIRE CONDITIONS. MOLTEN ALUMINUM CAN REACT VIOLENTLY WITH
    WATER. HYDROGEN CHLORIDE, HALIDE, AMMONIA COMPOUNDS, NITROGEN
    OXIDES &/OR SULPHUR OXIDES COULD FO RM UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NO SPECIAL PRECAUTIONS ARE NECESSARY FOR
    SPILLS OF BULK MATERIALS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT EXPOSE MOLTEN ALLOY TO WATER.
    AVOID INHALATION OF DUST & FUMES.
Other Precautions:NONE REQUIRED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED. NIOSH APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH & DELUGE SHOWER MEETING ANSI DESIGN
    CRITERIA . NONE REQUIRED.
Work Hygienic Practices:USE CARE TO AVOID LACERATIONS FROM THE SHEET
    EDGE (E.G., PAPER CUT).
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Solubility in Water:INSOLUBLE
Appearance and Odor:FLEXIBLE, MULTI-LAYERED SHEET; ESSENTIALLY
    ODORLESS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER, STRONG OXIDIZERS, ACIDS & HALOGENATED COMPOUNDS SHOULD BE
    AVOIDED.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, HALIDE, AMMONIA
    COMPOUNDS, NITROGEN OXIDES, PHOSPHOROUS AND/OR SULFUR OXIDES CAN BE
    FORMED WHEN UNDER FIRE CONDITIONS.

===================  Toxicological Information	===================

Toxicological Information:1-NITROPROPANE (REF 3): EYE-HMN: 150PPM/15M;
    IHL-HMN TCLO: 150PPM: EYE; ORL-RAT LD50: 455MG/KG.
    4-(2-NITROBUTYL)MORPHOLINE (REF 4): SKN-RBT LD50: 1.0ML/KG;
    SKN-RBT: 0.5ML, UNDILUTED: SEV IRRIT; SKN-GN P: 0.1% SOLN: SKIN
    SENSIT; ORL-RAT LD50: 926ML/KG; EYE-RBT: 0.1ML, APPLIED: IRRIT.
    4,4'-(2-ETHYL-2-NITROMETHYLENE)DIMORPHOLINE: NO TOX INFO AVAIL THRU
    LITERARY RESEARCH. METHYLENE DIMORPHOLINE (REF 3) : SCU-RAT TDLO:
    50MG/KG: ETA; SCU-RAT TD: 2000MG/KG/40W-I: ETA; SCU-RAT LD50:
    1000MG/KG. MORPHOLINE (REF 3): ORL-RAT LD50: 1050MG/KG; SKIN-RBT:
    995MG/24H SEV; EYE-RBT: 2MG SEV.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL SUBJECT TO FEDERAL, STATE & LOCAL
    GOVERNMENT REGULATIONS.

=====================  Regulatory Information  =====================

SARA Title III Information:NONE OF THE INGREDIENTS LISTED ARE SUBJECT
    TO THE REPORTING REQUIREMENTS OF 313 OF TITLE III OF THE SUPERFUND
    AMENDMENTS AND REAUTHORIZATION ACT OF 1986 AND 40 CFR PART 372.
State Regulatory Information:THIS MSDS IS NOT SUITABLE FOR USERS IN THE
    STATE OF CALIFORNIA.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.