NORTH AMERICAN REFRACTORIES CO -- GM DRYBOND, REFRACTORY MORTAR/COATING  -- 9350-00-153-6811
<pre>=====================  Product Identification  =====================

Product ID:GM DRYBOND, REFRACTORY MORTAR/COATING
MSDS Date:06/25/1990
FSC:9350
NIIN:00-153-6811
Status Code:A
=== Responsible Party ===
Company Name:NORTH AMERICAN REFRACTORIES CO
Address:1228 EUCLID AVE
City:CLEVELAND
State:OH
ZIP:44115-1809
Country:US
Info Phone Num:814-234-7981;216-621-5200
Emergency Phone Num:814-236-3890;415-432-4741
CAGE:86653
=== Contractor Identification ===
Company Name:NORTH AMERICAN REFRACTORIES
Address:UNK
Box:UNK
City:PICO RIVERA
State:CA
ZIP:90660
Country:US
Phone:562-942-2151
Contract Num:SP0490-99-M-W029
CAGE:1JME5
Company Name:NORTH AMERICAN REFRACTORIES COMPANY
Address:500 HALLE BUILDING 1228 EUCLID AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44115-1809
Country:US
Phone:814-234-7981/814-234-3890
CAGE:86653

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICA, CRYSTALLINE - QUARTZ   (CRYSTALLINE SILICA
    INCLUDING INGREFIENT #1 TO #3 = 10.0 - 30.0 %)
CAS:14808-60-7
RTECS #:VV7330000
OSHA PEL:0.1 MG/M3 RDUST
ACGIH TLV:0.1 MG/M3 RDUST

Ingred Name:SILICA, CRYSTALLINE - CRISTOBALITE	  (CRYSTALLINE SILICA
    INCLUDING INGREFIENT #1 TO #3 = 10.0 - 30.0 %)
CAS:14464-46-1
RTECS #:VV7325000
OSHA PEL:0.05 MG/M3 RDUST
ACGIH TLV:0.05 MG/M3 RDUST

Ingred Name:SILICA, CRYSTALLINE - TRIDYMITE    (CRYSTALLINE SILICA
    INCLUDING INGREFIENT #1 TO #3 = 10.0 - 30.0 %)
CAS:15468-32-3
RTECS #:VV7335000
OSHA PEL:0.05 MG/M3 RDUST
ACGIH TLV:0.05 MG/M3 RDUST

Ingred Name:ALUMINUM SILICATE; (ALUMINA SILICATE)
CAS:1302-93-8
Minumum % Wt:60.
Maxumum % Wt:100.

Ingred Name:HYDROUS ALUMINA SILICATE
CAS:1302-87-0
RTECS #:UU6858000
Minumum % Wt:10.
Maxumum % Wt:30.
OSHA PEL:10 MG/M3 TDUST (MFR)
ACGIH TLV:10 MG/M3 TDUST (MFR)

Ingred Name:ALUMINUM SULFATE  (SARA III). LD50 (ORAL,MOUSE) =  6207
    MG/KG.
CAS:10043-01-3
RTECS #:BD1700000
Minumum % Wt:7.
Maxumum % Wt:13.
OSHA PEL:10 MG/M3 TDUST (MFR)
ACGIH TLV:10 MG/M3 TDUST (MFR)
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:PHOSPHATE BINDER (AMMONIUM PHOSPHATE)
CAS:7722-76-1
Minumum % Wt:7.
Maxumum % Wt:13.

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE TOXICITY SECTION
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:INGREDIENT 6: MAY CAUSE IRRITATION TO
    SKIN, EYES AND LUNGS.  INGREDIENT 7: MAY IRRITATE SKIN AND EYES.
    INGREDIENTS 1, 2, & 3: CHRONIC EXPOSURE TO DUST COULD CAUSE
    PULMONARY PROBLEMS. CHRONIC OVEREXPOS URE TO DUST CONTAINING
    RESPIRABLE SIZED CRYSTALLINE SILICA (QUARTZ, CRISTOBALITE, AND
    TRIDYMITE) CAN CAUSE DELAYED LUNG INJURY (SILICOSIS). TARGET
    ORGANS: REPIRATORY SYSTEM AND LUNGS.
Explanation of Carcinogenicity:CRYSTALLINE SILICA (QUARTZ,
    CRISTOBALITE, TRIDYMITE): GRP 2A: IARC MONOGRAPHS.
Effects of Overexposure:IRRITATION, COUGHING.
Medical Cond Aggravated by Exposure:INHALATION OF DUST CONTAINING
    CRYSTALLINE SILICA MAY CONTRIBUTE TO PRE-EXISTING PULMONARY
    DISEASES SUCH AS ASTHMA AND LUNG DISORDERS ASSOCIATED WITH SMOKING
    OF TOBACCO.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH THOROUGHLY WITH SOAP AND WATER. INHALATION: REMOVE
    TO FRESH AIR. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES AND
    GET MEDICAL HELP.

=====================  Fire Fighting Measures  =====================

Flash Point:NONFLAMMABLE
Extinguishing Media:NONFLAMMABLE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID GENERATING DUST EXPOSURE DURING CLEANUP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID DUST GENERATION.
Other Precautions:CRYSTALLINE SILICA LEVELS IN USED REFRACTORIES MAY BE
    HIGHER OR LOWER THAN AS-SHIPPED DEPENDING ON SERVICE CONDITIONS.
    HYGIENE MONITORING MUST BE DONE TO INSURE THE PROPER EMPLOYEE
    PROTECTION DURING T EAROUT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED DUST AND/OR ORGANIC VAPOR
    RESPIRATOR FOR EXPOSURES ABOVE TLV.
Ventilation:LOCAL EXHAUST RECOMMENDED TO MAINTAIN EXPOSURES BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NUISANCE DUST HAZARD. AVOID CREATING DUST. WEAR DUST MASK UNDER DUSTY
    CONDITIONS.

==================  Physical/Chemical Properties  ==================

HCC:N1
Appearance and Odor:TAN, GRANULAR, DRY MIXTURE, ODORLESS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY GENERATE SO*2 FUMES.

===================  Toxicological Information	===================

Toxicological Information:ACGIH TLV FOR QUARTZ= 0.1 MG/M3, FOR
    CRISTOBALITE= 0.05 MG/3, FOR TRIDYMITE= 0.05 MG/M3. FOR ALL OTHE
    INGREDIENTS OSHA PEL= 10 MG/M3; ACGIH TLV = 10 MG/M3. TOXICITY
    DATA: QUARTZ  LCL0=300 MICROGRAM/10 Y-I INHALATION HUMAN;
    CRISTOBALITE TCL0=16 MPPCF/17.9Y-I INHAL HUMAN; TRIDMITE TCL0= 16
    MPPCF/8H/17.9Y-I INHAL HUMAN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF MATERIAL ACCORDING TO LOCAL, STATE OR
    FEDERAL REGULATIONS AS FINAL USED CONDITION OF PRODUCT DICTATES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.