A P GREEN INDUSTRIES INC -- CLIPPER SM  -- 9350-00F004112
<pre>=====================  Product Identification  =====================

Product ID:CLIPPER SM
MSDS Date:07/15/1992
FSC:9350
NIIN:00F004112
=== Responsible Party ===
Company Name:A P GREEN INDUSTRIES INC
Address:GREEN BOULEVARD
City:MEXICO
State:MO
ZIP:65265-2582
Country:US
Info Phone Num:314-473-3626
Emergency Phone Num:314-473-3626
Preparer's Name:ELLIS J SMITH
CAGE:84446
=== Contractor Identification ===
Company Name:GREEN A P INDUSTRIES INC
Address:GREEN BLVD
Box:City:MEXICO
State:MO
ZIP:65265-2582
Country:US
Phone:573-473-3626
CAGE:84446

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICA CRYSTALLINE, SILICA (CRISTOBALITE) (SUSPECTED HUMAN
    CARCINOGEN BY IARC)
CAS:14464-46-1
RTECS #:VV7325000
Other REC Limits:0.05 MG/CUM NIOSH
ACGIH TLV:0.05 MG/CUM

Ingred Name:SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN
    CARCINOGEN BY IARC, NTP)
CAS:14808-60-7
RTECS #:VV7330000
Other REC Limits:0.05 MG/CUM NIOSH
ACGIH TLV:0.1 MG/CUM RESP DUST

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:EYES: DUST OR CHIPS CAN CAUSE
    MECHANICAL IRRITATION. SKIN: CAN CAUSE MECHANICAL ABRASION OR CUTS.
    INHALATION: DUST, IF PRESENT MAY CAUSE UPPER RESPIRATORY
    IRRITATION. DUST MAY CAUSE LUNG DAMAGE IF INH ALED ON A LONG-TERM
    BASIS.
Explanation of Carcinogenicity:SEE INGREDIENTS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR 15 MINUTES. SKIN: TREAT CUTS OR
    ABRASIONS USING STANDARD FIRST AID PROCEDURES. INHALATION: REMOVE
    TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING UNLESS INSTRUCTED TO
    DO SO BY A	PHYSICIAN. PRODUCT IS NON-TOXIC AS SUPPLIED, BUT ITS
    ABRASIVE NATURE COULD DAMAGE INTERNAL ORGANS. OBTAIN MEDICAL
    ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:FOR BROKEN SHAPES OR FRAGMENTS, SWEEP, SHOVEL
    UP, OR PICK UP.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR WHEN CUTTING OR
    WHEN REMOVING THIS PRODUCT AFTER SERVICE.
Ventilation:GENERAL MECHANICAL VENTILATION IS ADEQUATE
Protective Gloves:LEATHER
Eye Protection:GOGGLES OR SAFETY GLASSES W/SIDESHIELDS
Other Protective Equipment:LONG-SLEEVED & LONG-LEGGED CLOTHING, SAFETY
    SHOES.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Spec Gravity:2.6-2.7
Solubility in Water:INSOLUBLE
Appearance and Odor:OFF-WHITE TO BROWN SOLID; NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:CAN BE DISPOSED OF IN AN APPROVED LANDFILL, IN
    ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.