AIRSERCO MFG COMPANY -- LIQUI-VAC SEALANT 4036  -- 8030-00F008163
<pre>=====================  Product Identification  =====================

Product ID:LIQUI-VAC SEALANT 4036
MSDS Date:11/26/1985
FSC:8030
NIIN:00F008163
=== Responsible Party ===
Company Name:AIRSERCO MFG COMPANY
Address:90 VERMONT AVENUE
City:DAYTON
State:OH
ZIP:45404
Info Phone Num:(513) 461-1754
Emergency Phone Num:(513) 461-1754
CAGE:FO326
=== Contractor Identification ===
Company Name:AIRSERCO MFG CO.
Address:90 VERMONT AVENUE
Box:City:DAYTON
State:OH
ZIP:45404
Phone:(513) 461-1754
CAGE:96662
Company Name:AIRSERCO MFG COMPANY
Address:90 VERMONT AVENUE
City:DAYTON
State:OH
ZIP:45404
Phone:(513) 461-1754
CAGE:FO326

=============  Composition/Information on Ingredients  =============

Ingred Name:2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS:111-15-9
RTECS #:KK8225000
Fraction by Wt: 5-10%
OSHA PEL:S,100 PPM
ACGIH TLV:S, 5 PPM; 9192

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 35-50%
Other REC Limits:100 PPM
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:TRADE SECRET COMPONENT
Fraction by Wt: 4-10%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM

Ingred Name:ACRYLIC RESIN
Fraction by Wt: BALANCE

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: SOLVENT VAPOR. PRODUCT
    WILL NOT PRESENT ACTUAL HEALTH HAZARDS IF HANDLED IN ACCORDANCE
    WITH GOOD INDUSTRIAL HYGIENE PRACTICES. NORMAL DAILY USE BY
    AIRSERCO PERSONNEL OVER A 30 YEAR PERIOD  HASN'T RESULTED IN ANY
    HEALTH INCIDENTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: BREATHING OF CONCENTRATED SOLVENT
    VAPORS MAY CAUSE HEADACHE, NAUSEA, DIZZINESS, VOMITING. SKIN: MAY
    CAUSE DEFATTING & DERMATITIS, & ABSORPTION OF HARMFUL AMOUNTS OF
    MATERIAL.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH WITH SOAPY WATER. EYE: FLUSH WITH WATER AT LEAST
    15 MIN. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE
    VOMITING. GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:40F
Lower Limits:1.4%
Upper Limits:6.7%
Extinguishing Media:CO, DRY CHEMICAL, FOAM, HALON AGENTS
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, BUT MAY BE USED IN
    SPRAY TO COOL CONTAINER. NIOSH APPROVED BREATHING APPARATUS SHOULD
    BE WORN FOR INDOOR FIRES.
Unusual Fire/Explosion Hazard:VAPORS MAY IGNITE IF ALLOWED TO
    ACCUMULATE NEAR AN IGNITION SOURCE. CLOSED CONTAINER MAY EXPLODE IF
    EXPOSED TO EXTREME HEAT NEAR A FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL POTENTIAL IGNITION SOURCES,
    VENTILATE AREA. SMALL SPILLS OF LIQUI-VAC MAY BE ABSORBED WITH
    VERMICULITE OR SAWDUST & WIPE UP WITH RAGS. UPON EVAPORATION
    SOLVENTS HARMLESS PRODUCT RESIDUE  CAN BE SCRAPED & CONVENTIONALLY
    DISPOSED.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STANDARD 1 QT. SCREW TOP CAN CONTAINER
    TO BE CLOSED AFTER EACH USE. STORE AWAY FROM HEAT & IGNITION
    SOURCES.
Other Precautions:USE WITH ALL CAUTIONS APPLICABLE TO FLAMMABLE
    LIQUIDS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN CONFINED AREAS USE NIOSH APPROVED BREATHING
    EQUIPMENT WITH ORGANIC VAPOR CARTRIDGES.
Ventilation:NOT REQUIRED FOR NORMAL INTENDED USE WITH ADEQUATE
    VENTILATION.
Protective Gloves:RESISTANT
Eye Protection:GOGGLES
Other Protective Equipment:NOT NORMALLY REQUIRED BY TYPICAL USER FOR
    SMALL QUANTITY.
Work Hygienic Practices:APPLY GOOD HOUSEKEEPING AND HYGIENE PRACTICE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:231F
Vapor Pres:22.0
Vapor Density:4.7
Spec Gravity:.92
Evaporation Rate &amp; Reference:(BUTYL ACETATE = 1) 2.2
Solubility in Water:23%
Appearance and Odor:COMPOUND IS WATER CLEAR, VERY VISCOUS LIQUID WITH
    MILD ODOR.
Percent Volatiles by Volume:57%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH ALKALIES, LIQUID CHLORINE, STRONG OXIDANTS,
    ACIDS OR BASES.
Stability Condition to Avoid:STORE AWAY FROM HEAT & IGNITION SOURCES.
Hazardous Decomposition Products:CO & CO2

====================  Disposal Considerations  ====================

Waste Disposal Methods:UNUSED PRODUCT DISPOSAL IN ACCORDANCE WITH ALL
    APPLICABLE LAWS & REGULATIONS CONSIDERING HAZARDOUS & FLAMMABLE
    SOLVENT INGREDIENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.