AMERWAY INC -- TIN/LEAD SOLDER  -- 3439-00-273-1637
<pre>=====================  Product Identification  =====================

Product ID:TIN/LEAD SOLDER
MSDS Date:11/01/1994
FSC:3439
NIIN:00-273-1637
Status Code:A
=== Responsible Party ===
Company Name:AMERWAY INC
Address:3701 BEALE AVE
City:ALTOONA
State:PA
ZIP:16601
Country:US
Info Phone Num:814-944-0200
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:SEAN MCHUGH
Chemtrec Ind/Phone:(800)424-9300
CAGE:0J598
=== Contractor Identification ===
Company Name:AMERWAY INC
Address:3701 BEALE AVE
Box:City:ALTOONA
State:PA
ZIP:16601
Country:US
Phone:800-829-6337; FX:814-9441463
CAGE:0J598
Company Name:DEAL PRODUCTS
Address:6 CLINTON AVE
Box:177
City:WESTFIELD
State:MA
ZIP:01086
Country:US
Phone:413-562-1369
Contract Num:SP0400-99-V-1724
CAGE:0BP74

=============  Composition/Information on Ingredients  =============

Ingred Name:LEAD (SARA 313) (CERCLA)
CAS:7439-92-1
RTECS #:OF7525000
Minumum % Wt:0.
Maxumum % Wt:100.
OSHA PEL:SEE 1910.1025
ACGIH TLV:0.15 MG/M3 DUST
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Minumum % Wt:0.
Maxumum % Wt:100.
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: DUST/FUME WILL BE
    IRRITANT. SKIN: NOT A ROUTE OF ENTRY INTO BODY. INGESTION: LEAD IS
    TOXIC & CUMULATIVE, AFFECTING KIDNEYS, REPRODUCTION & NERVOUS
    SYSTEM. ANTIMONY IS TOXIC & DUST/FUME CA N CAUSE NASAL SEPTAL
    ULCERATION & STOMACH LINING IRRITATION. INHALATION: MAY CAUSE NOSE
    & BRONCHIAL TRACT IRRITATION. CHRONIC:KIDNEYS, REPODUCTIVE AND
    NERVOUS SYSTEM, BLOOD.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:INHAL: IRRITATION OF NOSE, THROAT, COUGHING. 
    INGEST:  ANEMIA, INSOMNIA, WEAK, IRRITABILITY, CONSTIPATION &
    STOMACH PAINS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
    THOROUGHLY WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING.
    INGESTION: INDUCE VOMITING IF PERSON IS CONSCIOUS. GET MEDICAL
    ATTENTION. INHAL ATION: REMOVE TO FRESH AIR. GET MEDICALATTENTION.
    NOTES TO MD: NOT APPLICABLE.

=====================  Fire Fighting Measures  =====================

Flash Point:NON FLAMMABLE
Extinguishing Media:NOT APPLICABLE. USE MEDIA SUITABLE FOR SURROUNDING
    FIRE
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ALLOW TO SOLIDIFY AND COLLECT IN SEALED
    CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID INGESTION OR INHALATION OF DUST
    AND FUMES. STORE IN DRY CONDITIONS.
Other Precautions:LEAD USE IS REGULATED UNDER OSHA 29 CFR 1910.1025. NO
    FOOD OR DRINK SHOULD BE ALLOWED IN AREAS WHERE THESE PRODUCTS ARE
    HANDLED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:ONLY REQUIRED IF TLV'S ARE EXCEEDED. USE A NIOSH
    APPROVED RESPIRATOR FOR TOXIC DUST AND/OR FUME. NOTE: SEE 29 CFR
    1910.1025, SUBPART (F) OF OSHA'S LEAD STANDARD.
Ventilation:IF FUME OR DUST IS BEING GENERATED, MECHANICAL VENTILATION
    MUST BE PROVIDED TO MAINTAIN EXPOSURE LEVELS BELOW TLV'S.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA
Work Hygienic Practices:PERSONNEL MUST WASH THOROUGHLY AFTER HANDLING
    THE METAL, BEFORE DRINKING, EATING, OR SMOKING.
Supplemental Safety and Health
AVOID EXPOSURE TO METAL DUST AND FUMES.

==================  Physical/Chemical Properties  ==================

HCC:N1
Melt/Freeze Pt:=326.7C, 620.F
Vapor Pres:NOT VOLATILE
Vapor Density:NOT VOLATI
Solubility in Water:NIL
Appearance and Odor:GRAY COLORED METAL WITH NO ODOR.
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & BASE.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:LEAD AND TIN FUMES AT HIGH
    TEMPERATURES (ABOVE 800F).

====================  Disposal Considerations  ====================

Waste Disposal Methods:RETURN TO SUPPLIER FOR REPROCESSING. OR DISPOSE
    OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

===================  MSDS Transport Information  ===================

Transport Information:NOT REGULATED.

=====================  Regulatory Information  =====================

SARA Title III Information:LEAD IS ON THE LIST OF HAZARDOUS SUBSTANCES
    AND IS REPORTABLE.
Federal Regulatory Information:LEAD IS ALSO REQULATED BY OSHA.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.