DRYDEN OIL COMPANY -- DRYDENE FIBROUS BEARING LUBRICANT PETRO LUB  -- 9150-00N009962
<pre>=====================  Product Identification  =====================

Product ID:DRYDENE FIBROUS BEARING LUBRICANT PETRO LUB
MSDS Date:10/14/1987
FSC:9150
NIIN:00N009962
=== Responsible Party ===
Company Name:DRYDEN OIL COMPANY
Address:9300 PULASKI HIGHWAY
City:BALTIMORE
State:MD
ZIP:21220
Info Phone Num:301-574-5000
Emergency Phone Num:301-574-5000
CAGE:40310
=== Contractor Identification ===
Company Name:DRYDEN OIL CO INC
Address:9300 PULASKI HWY
Box:City:BALTIMORE
State:MD
ZIP:21220
Country:US
Phone:301-574-5000
CAGE:40310

=============  Composition/Information on Ingredients  =============

Ingred Name:LUBRICATING OIL BASE STOCK.
CAS:64742-52-5
RTECS #:PY8035000
Fraction by Wt: >80%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PROPRIETARY ADDITIVES
Fraction by Wt: <20%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:N/K (FP ORNL)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES,SKIN,INGESTION,INHALATION:N/K .
Medical Cond Aggravated by Exposure:N/K (FP ORNL)

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH W/ CLEAR H2*O FOR AT LEAST 15MIN OR UNTIL
    IRRITATION SUBSIDES.SKIN:REMOVE ANY CONTAMINATED CLOTHING AND WASH
    SKIN WITH SOAP AND WATER.INGESTION:DO NOT INDUCE VOMITING.CALL A
    PHYSICIAN IMMED IATELY.INHALATION:REMOVE FROM EXPOSURE AND CALL A
    PHYSICIAN.ADMINISTER O*2.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:365F,185C
Lower Limits:7%
Upper Limits:0.9%
Extinguishing Media:FOAM,WATER FOG,DRY CHEMICAL,CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .USE H*2O TO KEEP FIRE EXPOSED CONTAINERS
    COOL.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION PRODUCTS
    INCLUDE:FUMES,SMOKE,CARBON MONOXIDE,SULFUR OXIDES,ALDEHYDES,AND
    OTHER UNIDENTIFIED ORGANIC COMPOUNDS.DO NOT PRESSURIZE,(SEE SUPP)

==================  Accidental Release Measures  ==================

Spill Release Procedures:RECOVER FREE PRODUCT.ADD SAND,EARTH,OR OTHER
    SUITABLE ABSORBENT TO SPILL AREA.KEEP PRODUCT OUT OF SEWERS AND
    WATERCOURSES BY DIKING OR IMPOUNDING.ADVISE AUTHORITIES IF PRODUCT
    ENTERS SEWERS,WATERWAYS, OR EXTENSIVE LAND AREAS.COMPLY WITH
    ALLREGS.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE PRODUCT WITH CAUTION AROUND
    SPARKS,PILOT LIGHTS,STATIC ELECTRICITY,AND OPEN FLAME.
Other Precautions:EMPTY DRUMS SHOULD BE COMPLETELY DRAINED,PROPERLY
    BUNGED,AND RETURNED TO A DRUM RECONDITIONR.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
    CONCENTRATION BELOW TLV .
Protective Gloves:USE CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOGG,FACESHIELD OPTIONAL 
Other Protective Equipment:N/K 
Work Hygienic Practices:REMOVE CONTAMINATED CLTHG,LAUNDER BEFORE
    REUSE.DISCARD CONTAMINATED SHOES.WASH AFTER CONTACT WITH SOAP AND
    WATER.
Supplemental Safety and Health
SPEC GRAV:0.90 AT 16C,60F(WATER=1).POUR POINT:FREEZING POINT
    0F,-17C.EXPLO HAZ:CUT,WELD,BRAZE,SOLDER,DRILL,GRIND,OR EXPOSE TO
    HEAT,FLAMES,SPARKS,OR OTHER SOURCES OF IGNITION:THEY MAY EXPLODE
    AND CAUSE  INJURY OR DEATH.EXPOSURE LIMIT FOR TOTAL PRODUCT:5
    MG/CUM OIL MIST (MFR).

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:NEGLIGIBLE
Vapor Density:>AIR
Spec Gravity:SEE SUPP DATA
Evaporation Rate &amp; Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE <0.1%
Appearance and Odor:BROWN,FIBEROUS SEMI-SOLID,SOAPY.
Percent Volatiles by Volume:NEGLIG

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:AVOID HEAT,OPEN FLAMES,AND ALL OTHER
    POSSIBLE SOURCES OF IGNITION.
Hazardous Decomposition Products:FUMES,SMOKE,CARBON MONOXIDE,SULFUR
    OXIDES,ALDEHYDES,AND OTHER UNIDENTIFIED ORGANIC COMPOUNDS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.