THERMACOTE WELCO -- E70S2  -- 3439-00N074982
<pre>=====================  Product Identification  =====================

Product ID:E70S2
MSDS Date:08/14/1990
FSC:3439
NIIN:00N074982
=== Responsible Party ===
Company Name:THERMACOTE WELCO
Address:1051 YORK RD
City:KINGS MOUNTAIN
State:NC
ZIP:28086
Country:US
Info Phone Num:704-739-6424
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:OAES5
=== Contractor Identification ===
Company Name:THERMACOTE WELCO
Address:HWY 161 YORK RD
City:KINGS MTN
State:NC
ZIP:28086
Phone:(704) 739-6421
CAGE:OAES5
Company Name:THERMACOTE-WELCO CO SUB OF FOSTER WHEELER CORP
Address:YORK RD
Box:828
City:KINGS MOUNTAIN
State:NC
ZIP:28086
Country:US
CAGE:24559

=============  Composition/Information on Ingredients  =============

Ingred Name:CARBON BLACK; (CARBON)
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: 0.50%
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9495

Ingred Name:MANGANESE (SARA 313)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 2.50%
OSHA PEL:C 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9495

Ingred Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 1.50%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9495

Ingred Name:COPPER (SARA 313) (CERCLA)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0.50%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2 MG/M3 FUME; 9495
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 0.75%
OSHA PEL:10 PPM.
ACGIH TLV:10 PPM.

Ingred Name:ALUMINUM (SARA 313)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 0.50%
OSHA PEL:15 MG/M3 DUST
ACGIH TLV:10 MG/M3 DUST; 9495

Ingred Name:TITANIUM
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: 0.50%
OSHA PEL:N/K 
ACGIH TLV:10MG/M3 TOTAL (MFR)

Ingred Name:ZIRCONIUM
CAS:7440-67-7
RTECS #:ZH7070000
Fraction by Wt: 0.50%
OSHA PEL:5 MG ZR/M3
ACGIH TLV:5 MG ZR/M3

Ingred Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: BAL
OSHA PEL:N/K 
ACGIH TLV:5 MG/M3 FE203FE(MFR)

Ingred Name:SUPDAT:PERCENT & FORM FROM INGRED LISTED IN SECTION II.
    FUME & GAS DECOMP PRODS, & NOT INGREDS IN ELECTRODE, (ING 11)
RTECS #:9999999ZZ

Ingred Name:ING 10:ARE IMPORTANT. THE CONC OF GIVEN FUME/GAS COMPONENT
    MAY DECR/INCR BY MANY TIMES ORIGINAL CONCENTRATION (ING 12)
RTECS #:9999999ZZ

Ingred Name:ING 11:IN ELECTRODE. NEW CMPDS NOT IN ELECTRODE MAY FORM,
    DECOMP PRODS OF NORM OPERATION INCL THOSE ORIGINATING (ING 13)
RTECS #:9999999ZZ

Ingred Name:ING 12:FROM VOLATILIZATION, RXN, OXIDATION OF MATL IN
    SECTION II, PLUS THOSE FROM BASE METAL & COATING. (ING 14)
RTECS #:9999999ZZ

Ingred Name:ING 13:REASONABLY EXPECTED FUME CONSTITUENTS OF PROD COULD
    INCL PRIMARILY OXIDES OF IRON: SECONDARILY COMPLEX (ING 15)
RTECS #:9999999ZZ

Ingred Name:ING 14:OXIDES OF MANGANESE & SILICON & ALUMINUM. GASEOUS
    RXN PRODS: CARBON MONOXIDE, CARBON DIOXIDE. OZONE & (ING 16)
RTECS #:9999999ZZ

Ingred Name:ING 15:NITROGEN OXIDES MAY BE FORMED BY RADIA FROM ARC, &
    SHIELDING GASES WHEN EMPLOYED. ONE REC WAY TO DETERM (ING 17)
RTECS #:9999999ZZ

Ingred Name:ING 16:COMPOSITION & QTY OF FUMES & GASES TO WHICH WORKERS
    ARE EXPOSED IS TO TAKE AIR SAMPLE FROM INSIDE WELDERS(ING 18)
RTECS #:9999999ZZ

Ingred Name:ING 17:HELMET/IN WORKING ZONE. SEE AWS F1.1 & AWS
    F1.2-1985.(ING 19)
RTECS #:9999999ZZ

Ingred Name:ING 18:AVAILABLE FROM THE AM. WELDING SOCIETY. SEE AWS
    PUBLICATION: "FUMES AND GASES IN THE WELDING ENVIRONMENT".
RTECS #:9999999ZZ

Ingred Name:OTHER PROT EQUIP:AM. STANDARD 249.1-1983. SAFETY IN WELDING
    & CUTTING, WELDING HANDBOOK, VOL 1, SAFE (ING 21)
RTECS #:9999999ZZ

Ingred Name:ING 20:PRACTICES IN WELDING AND CUTTING.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC WELDING MAY CREATE THE
    FOLLOWING: FUMES AND GASES CAN BE DANGEROUS TO YOUR HEALTH. ARC
    RAYS CAN INJURE EYES AND BURN SKIN. ELECTRIC SHOCK CAN KILL.
Explanation of Carcinogenicity:CARBON BLACK:IARC MONOGRAPHS ON THE
    EVALUATION OF CARCINOGENIC RISK OF CHEMS TO MAN, VOL 65, PG 24-27,
    1995:GROUP 2B.
Effects of Overexposure:SHORT TERM-DIZZINESS, NAUSEA, DRYNESS &
    IRRITATION OF NOSE, THROAT, EYES, CHEST TIGHTNESS, FEVER, ALLERGIC
    REACTION. OVEREXPOSURE TO FUMES-SIDEROSIS POSSIBLE. MAY AFFECT
    PLUMONARY FUNCTION.
Medical Cond Aggravated by Exposure:SEE SIGNS & SYMPTOMS OF EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:INGEST: CALL MD IMMEDIATELY . EYES: IMMEDIATELY FLUSH WITH
    POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD
    . SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD . I NHAL:
    REMOVE TO FRESH AIR, OBTAIN MEDICAL ATTENTION. EMPLOY FIRST AID
    TECHNIQUES RECOMMENDED BY AM. RED CROSS.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
    WELDING ARC & SPARKS CAN IGNITE COMBUSTS & FLAM. REFER TO AM.
    NATIONAL STANDARD Z49.1 FOR FIRE PVNT (SUPDAT)
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NOT APPLICABLE.
Other Precautions:NOT APPLICABLE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:MAKE SURE INHALED AIR DOES NOT CONTAIN FUME
    CONSITUENTS ABOVE PERMISSIBLE EXPOSURE LEVELS. NIOSH APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:SEE RESPIRATORY PROTECTION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
    OTHER PREC FOR ADDNL SAFETY INFO ON WELDING & CUTTING, SEE (ING 20)
Work Hygienic Practices:NOT APPLICABLE.
Supplemental Safety and Health
FIRE FIGHT PROC:DURING THE USE OF WELDING & ALLIED PROCS. HAZ DECOMP
    PROD:BEING USED. OTHER FACTORS INCL COATINGS ON THE METAL BEING
    WELDED (PAINT, PLATING/GALVANIZING). NUMBER OF WELDERS & VOL OF WOR
    K AREA AS PRESENCE OF CONTAMS IN ATM. WHEN ELECTRODE IS CONSUMED
    FUME & GAS DECOMP PRODS GENERATED ARE DIFF IN (ING 10)

==================  Physical/Chemical Properties  ==================

Appearance and Odor:SOLID WIRE OR ROD.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:THE COMPOSITION & QUALITY OF WELDING
    FUMES & GASES ARE DEPENDENT UPON METAL BEING WELDED, PROCESS &
    ELECTRODE (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
    ENVIRONMENT, DISCARD PRODUCT RESIDUE, DISPOSABLE CONTAINER OR LINER
    IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE WITH
    FEDERAL, STATE AND LOC AL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.